Stainless Steel 310S Pipe | ASTM A312 TP310s Welded/ Seamless Tube

PED approved Stainless Steel 310S Pipe supplier and exporter in India

Ask for MTC EN 10204/3.1B before buying ASTM A312 TP310S Round Pipes

what is 310S Stainless Steel Pipe?

The SS 310s is an austenitic heat-resistant alloy grade. A Stainless Steel 310S Pipe is designed with a superior chemical composition of nickel and chromium with other constituting alloys. These pipes possess good oxidation properties under mild cyclic temperatures up to 2000 degrees F. The 310S Stainless Steel Pipe has enhanced corrosion resistance properties and is tolerant to a lot of reducing acids. These pipes possess good toughness and work well in cryogenic temperatures up to -450 degrees F. A SS 310S Pipe has moderate strength and is capable to work in atmospheres containing H2S. The pipes have low magnetic permeability and have a lower carbon content. These pipes can be easily welded following standard shop welding procedures. The 310S Stainless Steel Tube has a higher strength when compared to pipes of these grades. These tubes have excellent mechanical properties and can be produced in a square, round and rectangular shapes. The tubes have a hardness of 217 max Brinell and are seen in heat exchangers, food processing equipment, radiant tubes, petroleum refining, etc.

Check online inventory of Stainless Steel 310S Welded Pipe, AISI 310s 1.4845 Round Pipe, UNS S31008 SS Square Pipes at Lowest price

what is ASTM A312 TP310S?

The ASTM A312 TP310S is a low-carbon grade that covers non-pressurized applications. These grades are specified with properties that are intended for use as design value of the ASME items. The items in this grade cover over 12,000 standards. The ASTM A312 TP310S Welded Pipe is seen in lower pressure and temperature environments. These pipes require heavy welding conditions and possess good material toughness. A Stainless Steel 310S ERW Pipe is available with an outer diameter between 6.35 to 114.3mm. These pipes have lengths above 26 meters and possess a thickness between 0.8 to 12.7mm.

ASTM A312 UNS S31008 Seamless Pipe & SS 310S ERW Pipes European standard is EN X8CrNi25-21 and Yield Strength 220 MPa

what is ASME SA 312 TP310S?

The ASME SA 312 TP310S grade is specified for a pressurized vessel. ASME SA 312 TP310S Seamless Pipe is designed via an extrusion process and possesses superior strength, allowing them to work in harsh environments. The pipes in this grade cover about 600 technical codes.