St 52-0 Carbon Steel Seamless Tubes
 

St 52-0 CS seamless tube Supplier in Mumbai, refer specification table

DIN 1629 St52.0 CS Seamless tube Specification

Low Temperature CS DIN 2609 Grade ST 52-0 Seamless Pipe Size


4 to 219 to 0.5 to 20mm

Carbon Steel DIN 2609 Grade ST 52-0 Welded Pipe Size


5.0 mm – 1219.2 mm

 

EFW Pipe size of DIN 2609 Grade St52


5.0 mm – 1219.2 mm

DIN 2609 Gr. ST52-0 Swg & Bwg


10/ 12/ 14/ 16 / 18/ 20 Swg

 

Density


7.85 g/cm3

Length


Maximum 6000 mm

 

Grade ST 52-0 DIN 2609 tube length


Single Random
Double Random
Standard
Cut length

Finish of St-25-0 tube


MF
Polished
AP (Annealed & Pickled)
No 4
BA (Bright & Annealed)

 

Ends of St-52-0 SMLS tube


Plain End
Beveled End
Threaded Pipe

Applications


Petroleum
Oil and gas
Petrochemical
Fertilizer

 

Most Common types of schedule 80 pipe

DIN 2609 Grade ST 52-0 Round pipe

DIN 2609 Grade ST 52-0 Round pipe

 DIN 2609 Grade St 52-0 CS EFW Pipe

DIN 2609 Grade St 52-0 CS EFW Pipe

Carbon Steel Cold Drawn Tube

Carbon Steel Cold Drawn Tube

DIN 1629 St52.0 Seamless tube

DIN 1629 St52.0 Seamless tube

Carbon Steel ST 52 Clad Pipe

Carbon Steel ST 52 Clad Pipe

St 52-0 CS Square Tubes

St 52-0 CS Square Tubes

Manufacturer of Carbon Steel ST 52 in thickness ranging from 0.5mm to 20mm

Wall thickness of DIN 2609 Grade St 52-0 CS tube

Execution Cold worked tube or cold-drawn Hot-rolled tube Hot-rolled peeled tube
Wall tolerance mm ± 0.30 ± 0.35 ± 0.40 ± 0.7 ± (5 % x wt + 0.1) ± 0.8 ± (5 % x wt + 0.2 )
Size Range OD < 40 OD 40 - 80 OD > 80 Wall Thickness < 6 WT 6 - 8 WT > 8 OD – 80 OD > 80 Wall < 12 Wall - 12 All sizes wall < 12 wall - 12
OD Tolerance + 0.30/- 0 *+ 0.35/- 0 *+ 0.40/- 0 * ± 0.4 ± 0.5 % of OD + 0.25/- 0

DIN 2609 Grade ST 52-0 tube chemical composition

Ask RFQ directly from largest stockist of St 52-0 CS welded tube from Mumbai

Carbon max 0.22
Phosphorous 0.04
Sulphur 0.035
Others Al min 0.020
Silicon max 0.55
Manganese max 1.60

Carbon Steel ST 52 tube mechanical properties

Refer DIN 2391 ST 52 tube mechanical properties before buying the material
Yield Strength MPa min -
ksi min -
Tensile Strength MPa min 500
MPa min 650
ksi min
Elongation A5 min Percentage 21

Equivalent of DIN 2609 Grade ST 52-0 SMLS tube

Standards Value
DIN DIN 1629 Grade St 52-0
BS NFAGrade P355N
NFA ASTM A 381 Grade Y 52
EN EN 10216-3 Grade P355N
ASTM ASME SA 381 Grade Y 52

DIN 1629 St52.0 CS length tolerance

Distributor of DIN 1629 Grade St 52-0 Carbon Steel tube for oil and gas, petrochemical and power generation industries
Component length mm 1200-5000 10-100 600-1200 100-600
OD 30-100   + 5.0/- 0 + 1.0/- 0 + 3.0/- 0 + 2.0/- 0
OD 100-254   + 6.0/- 0 + 2.0/- 0 + 4.0/- 0 + 3.0/- 0
Rising Steel Industries